6 11, 2017

Reverse Engineer a BMW Speaker

By | November 6th, 2017|

https://cimquesttv.wistia.com/medias/p4uotsh9xe?embedType=async&videoFoam=true&videoWidth=640 Today we reverse engineer a broken BMW speaker frame through 3D scanning, and then print a new replacement part using our HP Jet Fusion 4200. The freeform shape of the frame proved to be a challenge but with the right tools, we were able to effectively reconstruct the part in CAD.

11 09, 2017

Reverse Engineering -3D Pipe

By | September 11th, 2017|

https://cimquesttv.wistia.com/medias/ac4ufwfunr?embedType=async&videoFoam=true&videoWidth=640 Extracting the center line of a 3D pipe that contains angles in 2 dimensions is not that complicated. However, when you have compound angles, and the tube is bending in the X, Y, and Z directions simultaneously, extracting the centerline can be quite challenging.

7 08, 2017

CMM Inspection without a Master Part

By | August 7th, 2017|

https://cimquesttv.wistia.com/medias/zuzbx0s6fj?embedType=async&videoFoam=true&videoWidth=640 Automated CMM's typically require a master part data set when performing CMM inspection on hundreds (or thousands!) of the same part. But what if a master part is not available? Today we show how to manually capture measurements on the fly with Verisurf and the CMM Master.

23 05, 2017

Simultaneous Synchronized Scanning

By | May 23rd, 2017|

https://cimquesttv.wistia.com/medias/8g5m36xd13?embedType=async&videoFoam=true&videoWidth=640 Today we present a great way to capture parts where you need to leverage size...but at the same time capture very small fine details.

24 04, 2017

Geomagic Design X Demo

By | April 24th, 2017|

https://cimquesttv.wistia.com/medias/ab47z5i6za?embedType=async&videoFoam=true&videoWidth=640 Today we show how to produce a fully featured, editable, native CAD model, directly from a scan, using Geomagic Design X Demo.

27 03, 2017

Reverse Engineering Sheet Metal to a Flat Pattern

By | March 27th, 2017|

https://cimquesttv.wistia.com/medias/k4jbcerwx2?embedType=async&videoFoam=true&videoWidth=640 Converting a used sheet metal part back to its original flat pattern can be challenging due to the distortion and bending of used parts. Design X software provides tools to achieve this, allowing you to produce a complete manufacturing drawing of the original pattern.

20 02, 2017

Improving Aesthetics of a Scanned Mesh

By | February 20th, 2017|

http://cimquesttv.wistia.com/medias/d9bplicaa3?embedType=async&videoFoam=true&videoWidth=640 3D scans of worn parts often produce small holes, imperfections, and blemishes. Using tools in Geomagic Wrap, we can improve the cosmetics of a model by modifying the mesh structure underneath. Attend one of our upcoming events revealing the all new Stratasys F123 Series, along with insight into 3D scanning technology. http://www.cimquest-inc.com/stratasys-f123-series-3d-printer-2/

9 01, 2017

Go!Scan Portable 3D Scanner

By | January 9th, 2017|

The Go!Scan 3D’s portability and accuracy allow engineers to scan a wide range of parts in very little time. Its white light system can help capture realistic renders with vibrant colors and authentic textures. http://cimquesttv.wistia.com/medias/hprgh5nl86?embedType=async&videoFoam=true&videoWidth=640