14 08, 2017

3D Offset on Curved Surfaces – SolidWorks 2017

By | August 14th, 2017|

https://cimquesttv.wistia.com/medias/5uro10hgpu?embedType=async&videoFoam=true&videoWidth=640 This command is ideal to use if you wanted to punch out the center of a 3D surface, or even create the design for an over molding, all the while keeping a constant offset from the face boundaries.

7 08, 2017

CMM Inspection without a Master Part

By | August 7th, 2017|

https://cimquesttv.wistia.com/medias/zuzbx0s6fj?embedType=async&videoFoam=true&videoWidth=640 Automated CMM's typically require a master part data set when performing CMM inspection on hundreds (or thousands!) of the same part. But what if a master part is not available? Today we show how to manually capture measurements on the fly with Verisurf and the CMM Master.

24 07, 2017

3D Printing for Low Volume Production

By | July 24th, 2017|

https://cimquesttv.wistia.com/medias/hzhvb78zn5?embedType=async&videoFoam=true&videoWidth=640 Siemens Mobility has developed an on-demand production model, allowing them to 3D print end-use parts for trains, vehicles, and other infrastructure. These parts comply with flame, smoke, and toxicity provisions, serving as lightweight alternatives to conventional parts.

11 07, 2017

What is Chip Load (Feed per tooth)

By | July 11th, 2017|

https://cimquesttv.wistia.com/medias/s1uturmj6t?embedType=async&videoFoam=true&videoWidth=640 Chip load given by tool manufacturers is the distance the material is moved into the cutter at the centerline of the tool as each cutting edge rotates through to cut. Watch to learn more.

12 06, 2017

Motion Simulation at Specific Intervals – SolidWorks 2017

By | June 12th, 2017|

The Mate Controller tool allows you to show and save the positions of assembly components at various mate values and degrees of freedom without using configurations for each position. You can quickly create an animation of an assembly in specific positions in space, and produce an .avi, without the having to manually create each and [...]

30 05, 2017

Infinite Build 3D Printer

By | May 30th, 2017|

https://cimquesttv.wistia.com/medias/zs80362e45?embedType=async&videoFoam=true&videoWidth=640 Developed for large part production, the Infinite-Build is designed to address the uncompromising requirements of aerospace, automotive and other industries. Based on proven FDM technology, the demonstrator can generate large, lightweight, thermoplastic parts with repeatable mechanical properties.

23 05, 2017

Simultaneous Synchronized Scanning

By | May 23rd, 2017|

https://cimquesttv.wistia.com/medias/8g5m36xd13?embedType=async&videoFoam=true&videoWidth=640 Today we present a great way to capture parts where you need to leverage size...but at the same time capture very small fine details.

16 05, 2017

Sandvik Coromant PrimeTurning

By | May 16th, 2017|

https://cimquesttv.wistia.com/medias/st6mt8m8j4?embedType=async&videoFoam=true&videoWidth=640 Prime Turning with Mastercam 2018 increases your turning abilities with faster metal removal rates and giving you greater than 50% productivity because you can turn in all directions.