19 12, 2016

Patterns and Features UI – SolidWorks 2017

By | December 19th, 2016|

http://cimquesttv.wistia.com/medias/ceg3cg6dv7?embedType=async&videoFoam=true&videoWidth=640 Today we present three cool enhancements when using Patterns and Features in SolidWorks 2017.

21 11, 2016

Wrap onto Freeform Surfaces – SolidWorks 2017

By | November 21st, 2016|

https://cimquesttv.wistia.com/medias/o9mc0t4gp8?embedType=async&videoFoam=true&videoWidth=640 You can now wrap 3D sketches onto various face types, and even multiple faces at once. This gives you greater flexibility, allowing you to create complex features in a shorter amount of time.

10 10, 2016

Wrap onto Freeform Surfaces – SolidWorks 2016

By | October 10th, 2016|

https://cimquesttv.wistia.com/medias/o9mc0t4gp8?embedType=async&videoFoam=true&videoWidth=640 You can now wrap 3D sketches onto various face types, and even multiple faces at once. This gives you greater flexibility, allowing you to create complex features in a shorter amount of time.

12 09, 2016

Internal & External Threads – SolidWorks 2016

By | September 12th, 2016|

http://cimquesttv.wistia.com/medias/ccslzz7yj1?embedType=async&videoFoam=true&videoWidth=640 SolidWorks has created a new thread function allowing you to quickly create threads, with custom parameters in one command. This is great for embedding threads for 3D printed parts.

15 08, 2016

Replacing Sub-assemblies with Multi-body Parts – SolidWorks 2016

By | August 15th, 2016|

http://cimquesttv.wistia.com/medias/ifjoiqei5m?embedType=async&videoFoam=true&videoWidth=640 When a sub-assembly is saved as a multi-body part, the mates between parts of sub-assemblies are saved as internal data inside the new part.

8 07, 2016

Edge Flanges – SolidWorks 2016

By | July 8th, 2016|

http://cimquesttv.wistia.com/medias/g5a5bna0xc?embedType=async&videoFoam=true&videoWidth=640 This sheet metal enhancement allows you to create edge flanges that are longer than the edge to which they are attached. In previous versions there were no options to manipulate the flange length, but you can now freely drag flange edges to the desired length.

6 06, 2016

Creating Rods and Tubes – SolidWorks 2016

By | June 6th, 2016|

http://cimquesttv.wistia.com/medias/li6kq17lw3?embedType=async&videoFoam=true&videoWidth=640 With the new "circular profile" in SolidWorks 2016, you can create solid rods or hollow tubes directly along edges without having to create a new sketch.

9 05, 2016

Bidirectional Sweep – SolidWorks 2016

By | May 9th, 2016|

http://cimquesttv.wistia.com/medias/paoe123gxh?embedType=async&videoFoam=true&videoWidth=640 Through this sweep function enhancement, you can create sweeps for a mid-path profile in either direction or the entire path (bidirectional sweep). You can also control the twist value of the path independently for each direction.