Latest from the Blog

Happy Thanksgiving

We would like to wish you and your families a very happy Thanksgiving. We are very grateful to have such a wonderful community and we would like to thank you for being a part of our extended family. All of us here at Cimquest wish you and yours a safe [...]

By | November 22nd, 2017|Uncategorized|0 Comments

Sandvik Prime Turning Install- Mastercam 2018

https://cimquesttv.wistia.com/medias/wsauxi76a1?embedType=async&videoFoam=true&videoWidth=640 This innovative new system from Sandvik integrates both specialized cutting tools and toolpath engineering to produce phenomenal efficiency gains in material removal rates.

By | November 20th, 2017|CQTV, MC 2018 Video Series|0 Comments

Preventing Upcuts in Mastercam 2018 Dynamic Turning

There is a new enhancement to the dynamic turning toolpaths in Mastercam 2018. In previous versions of Mastercam, you had to be careful not to gouge the part with the tool holder. Now in Mastercam 2018, one simple checkbox and an adjustable clearance angle can help prevent upcut motions which [...]

By | November 20th, 2017|Mastercam, Tech Tips|0 Comments

Employee Spotlight – Genise Postell

In today’s Employee Spotlight we are featuring Genise Postell, the Senior Office Administrator here at Cimquest. Here’s a little information that will help you get to know her a little better . . . What are your responsibilities at Cimquest? My main responsibility is to process Mastercam maintenance renewal orders and [...]

By | November 17th, 2017|News / Promos|0 Comments

AME 2017 – Full Event Recap

https://cimquesttv.wistia.com/medias/fpi9q2e7xx?embedType=async&videoFoam=true&videoWidth=640 With the help of over 600 people who attended this year's event, the AME has been established as a premiere manufacturing expo in the Tri-State region.

By | November 13th, 2017|2 Minute Tuesdays, CQTV, Insider Spotlight 2MT|0 Comments

Mastercam 2018 Simulation Presentation Files

There’s a new option in the Mastercam 2018 Simulator to save full 3D executable presentation files. In previous versions we could capture and save MP4 movies, but viewers could not change the capture perspective or zoom level. Now in Mastercam 2018, the presentation exe files are standalone files that can [...]

By | November 13th, 2017|Mastercam, Tech Tips|0 Comments