Latest from the Blog

Hybrid Smoothing- Mastercam 2018 Sharp corner smoothing is now available in the 3D high-speed hybrid toolpath. This feature will help refine your machined finishes and create more fluid motion in your programs.

By | November 27th, 2017|CQTV, MC 2018 Video Series|0 Comments

Mastercam 2018 Associative Linking

There is an interesting new option in the linking parameters for Mill toolpaths in Mastercam 2018. In previous versions there were only two options available on this page – Absolute and Incremental. Now, in 2018, a new option called Associative Linking has been added which takes full advantage of the [...]

By | November 27th, 2017|Mastercam, Tech Tips|0 Comments

Happy Thanksgiving

We would like to wish you and your families a very happy Thanksgiving. We are very grateful to have such a wonderful community and we would like to thank you for being a part of our extended family. All of us here at Cimquest wish you and yours a safe [...]

By | November 22nd, 2017|Uncategorized|0 Comments

Sandvik Prime Turning Install- Mastercam 2018 This innovative new system from Sandvik integrates both specialized cutting tools and toolpath engineering to produce phenomenal efficiency gains in material removal rates.

By | November 20th, 2017|CQTV, MC 2018 Video Series|0 Comments

Preventing Upcuts in Mastercam 2018 Dynamic Turning

There is a new enhancement to the dynamic turning toolpaths in Mastercam 2018. In previous versions of Mastercam, you had to be careful not to gouge the part with the tool holder. Now in Mastercam 2018, one simple checkbox and an adjustable clearance angle can help prevent upcut motions which [...]

By | November 20th, 2017|Mastercam, Tech Tips|0 Comments

Employee Spotlight – Genise Postell

In today’s Employee Spotlight we are featuring Genise Postell, the Senior Office Administrator here at Cimquest. Here’s a little information that will help you get to know her a little better . . . What are your responsibilities at Cimquest? My main responsibility is to process Mastercam maintenance renewal orders and [...]

By | November 17th, 2017|News / Promos|0 Comments